[Writelog] Multi-Multi Cabrillo file

[Tony Osman]

Here is one for the gurus here  :-)

Running Writelog 10.50 latest version.  Had a strange occurence whereby the
following happened:

During CQWW SSB contest, used three transmitting stations.  Two were
networked, one was remote and not networked.

After contest, took logs from networked stations and from single remote.
Setup computer to have computer ID different to the two networked stations
and opened the single file.  Network ID was populated with correct computer
number.  Log was then saved.  Then opened the networked log (from the two
networked stations) and saw that the Netw identification was all okay.

Merged both logs and saved file.  Now have complete merged log with correct
netw ids (ABC).  When Cabrillo file is generated and multi-multi selected,
there is no indication as to computer ID that made the QSO.  If Multi-2 or
Multi-Single selected in Cabrillo file setup window, then generated cabrillo
file contains the station ID that made the qso - although it does not use
the Netw id, but rather 0, 1 and 2 as the stations. (corresponding to A, B,
and C)

Question:   Is the correct operation?  What should be submitted as cabrillo
file for Multi-Multi operation?

73 to all on reflector,


Tony, VE3RZ
(Op at VE3YAA)