[WriteLog] RE: Auto CQ

Eric Hilding dx35 at hilding.com
Wed Nov 17 01:14:19 EST 2004

Several nice folks have offered direct reply suggestions:

Menu for Auto CQ from WL main menu is:

Timed CQ
(put in a time and check the auto box)

If it works the same way as RTTY you have to set the time LONGER than it
takes to send the message. If your wav file is say 5 seconds long, then
set the time for 7 seconds. Then it will send the CQ, wait 2 seconds and
start again. At least that is the way it works in the RTTY mode.

The time you set is not the time between CQ's--it is the time between
STARTS. So you just had time for one CQ. Increase it to 5 to 10 seconds and
see what you get. Duhhh.

I've done everything...still no dice.  I use the Auto-CQ in TR all the 
time...a piece of cake.

Is it possible there is *something* that needs to go into the .ini file 
here or some other switch to throw somewhere???  I'm re-posting in case 
some other poor soul is pulling their hair out with this one too but afraid 
to ask.

Tnx much & 73...

Rick, K6VVA

More information about the WriteLog mailing list