[WriteLog] Last minute problem

[Stu]

We had similar problem at GM5A tonight.
we just switched rig control off in writelog then enabled and checked all setting and was ok after that.
It only happened on the ICOM PRO11 radios we had the others were fine

Hope it helps

Stu MM0BSM

www.gm6nx.com
http://www.gmdx.org.uk/

----- Original Message ----- 
From: "John Peters" <petersj007 at hawaii.rr.com>
To: "WriteLog" <Writelog at contesting.com>
Sent: Friday, November 26, 2004 11:07 PM
Subject: [WriteLog] Last minute problem


My F1-F10 keys don't key/send anything.  The keying lead from COM1 is good since keyboard CW (Alt K) 
works.  The messages are correct for the F keys.

What USUALLY causes this problem?  My IBM 600S running WIN2000 and my neighbor ham running WIN98SE are 
both having the same problem and we've run out of places to look.

Expecting to log with WL and do manual CW unless the solution is obvious.

John K1ER/KH6
Tet AH7C
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/