[WriteLog] Writelog not seeing IC-706MKII - Help Please

[Peter E. Beedlow]

Used my 706MKIIG and Writelog on Miquelon Island with no problems. Used
the Writelog address and baud rate settings. If it is the only radio
connected to the PC or laptop you need to use COM 1.

Pete, NN9K
http://nn9k.home.mchsi.com


-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com] On Behalf Of A. Sewell
Sent: Tuesday, October 19, 2004 15:02
To: writelog at contesting.com
Subject: Re: [WriteLog] Writelog not seeing IC-706MKII - Help Please

I thought I would check out my 706MkIIG too.  Same thing.  However, it
does work by selecting Omni VI and setting the Icom address to 04H.
Probably will work with other rig selections too.

I also checked out the 706 on N1MM and found it expects the 706 to be
set to 58H.  Seems everyone wants a different address!  However, it
worked fine once I had the Icom set on the correct address.

73,

Alan N5NA


> Having a similar problem here.  No USB to Serial converter involved.
Using
> a Rigblaster Plus and the IC-17 Level Converter.  Dxbase 2003 can
> communicate with the 706MKII and vice versa, but no communication
between
> Writelog (10.48F) and the 706MKII.  My 756Pro, currently off the bench
> and into Icom for service, communicates with Writelog just fine using
> default CI-V values.
> 
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/