[WriteLog] CW keying on LPT1 with XP

[Jerry Flanders]

http://www.writelog.com/support/lpt_port_support_on_windows_nt.htm

At 22:57 2/3/2005, k2qmf at juno.com wrote:

>Well how in the world do I get the correct
>port address??  And what do I do with it when
>I get it????????????????
>
>H E L P...........    K2QMF
>
>
>On Thu, 03 Feb 2005 16:26:22 +0000 Jerry Flanders
><jeflanders at comcast.net> writes:
> > It went without any hitches for me a week ago also. Userport was
> > easily
> > installed and configured per the instructions. Note that a specific
> >
> > configuration for the exact port address on the PC is required. The
> > default
> > addresses shown as it starts up were NOT correct for my port.
> >
> > Good luck.
> >
> > Jerry W4UK
> >
> > At 15:23 2/3/2005, jduerbusch at charter.net wrote:
> > >After reading there comments on the cw keying I decided to try it
> > last
> > >night.  I had recently upgraded to Win/XP from Win98SE and I had
> > been
> > >keying cw with WL on a comport.
> > >
> > >Looking at the Port setup on WL all the LPT ports where grayed out.
> >  After
> > >I ran the program Userport and re-booted I now have LPT1 and LPT3
> > open and
> > >both work fine CW keying my rig.
> > >
> > >One note, the Writelog.ini file address for LPT1 ~ 3 need to be the
> > same
> > >as what Windows has listed.
> > >
> > >So bottomline is that it works fine.
> > >
> > >But my other problem is that in DXBase2005 I can't get it to send
> > CW from
> > >the LPT port, go figure??
> > >
> > >Joe K0BX
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> >
>_______________________________________________
>WriteLog mailing list
>WriteLog at contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/