[WriteLog] Using VE7CC AR Cluster with WL

[Jim Reisert AD1C]

Can more than one program connect to the VE7CC client at the same time?  It
would make a nice solution to being able to run DX4WIN and Writelog connected
to the same cluster.

--- Richard Zalewski <dick.w7zr at gmail.com> wrote:

> I have been using VE7CC's AR Cluster software and no problem with
> writelog.  I open the AR software, connect to N7US or any other
> cluster and then open writelog.  When Writelog opens In the packet
> terminal window I select file|telnet and then the ip address of
> 127.0.0.1 with port 7300.  (Sometimes the telnet address window opens
> up under the writelog window so you have to minimize writelog first to
> see if it is there.)


=====
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us