[WriteLog] 2 sound cards not working

[Jerry Flanders]

Just this morning I solved a similar problem by swapping the physical 
position of two PCI cards. Computer then recognized changes had been made 
and properly re-installed BOTH of them. This after spending yesterday 
pulling hairs!

Maybe uninstall drivers for these two cards before making the physical 
swap. (Don't know if this would be needed.)

If easy to do, you might want to try this - worked for me.

Jerry W4UK

At 16:58 1/28/05, Steve Forst wrote:
>I know this isn't  a Writelog problem, but i've seen a number of posts here
>about  running 2 sound cards.
>
>The Turtle Beach Santa Cruz card works fine, but the on board ac97  sound
>isn't recognized.  Device manager shows a yellow dot with exclaimation point
>and  tells me it can't start due to a code 10 error.
>
>If I pull the Santa Cruz out of the slot and reboot,  the ac97 works fine.
>Put it back in and the Santa Cruz works but no ac97.  I've tried
>uninstalling and reinstalling the ac97, but same results.
>
>Windows XP and HP Pavillion desktop pc.  No more open slots to install
>another soundcard and forget the ac97.  Any Ideas?
>
>Tnx, Steve KW3A
>kw3a at snip.net
>
>
>
>_______________________________________________
>WriteLog mailing list
>WriteLog at contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web:  http://www.writelog.com/