[WriteLog] 2 sound cards not working

[n4gi at tampabay.rr.com]

Don't know if you are setting up for RTTY decode only or AFSK & decode or SSB....?

I use FSK for TX, so I just added an external USB audio box so I could have another MMTY decoder for the 2nd rig without doing the more complex L/R input thing.  

Quick setup with no extra drivers, & cheap (~$39).  Mine is an off-brand, and I don't think it scored that well on the soundboard check, but since i'm only using it to RX it doesn't really matter.  My guess is that it doesn't do full duplex.

Here's an example:

http://www.creative.com/products/product.asp?category=1&subcategory=204&product=9103

73,
Blake N4GI 

----- Original Message -----
From: Steve Forst <kw3a at snip.net>
Date: Friday, January 28, 2005 11:58 am
Subject: [WriteLog] 2 sound cards not working

> I know this isn't  a Writelog problem, but i've seen a number of 
> posts here
> about  running 2 sound cards.
> 
> The Turtle Beach Santa Cruz card works fine, but the on board ac97 
> sound
> isn't recognized.  Device manager shows a yellow dot with 
> exclaimation point
> and  tells me it can't start due to a code 10 error.
> 
> If I pull the Santa Cruz out of the slot and reboot,  the ac97 
> works fine.
> Put it back in and the Santa Cruz works but no ac97.  I've tried
> uninstalling and reinstalling the ac97, but same results.
> 
> Windows XP and HP Pavillion desktop pc.  No more open slots to install
> another soundcard and forget the ac97.  Any Ideas?
> 
> Tnx, Steve KW3A
> kw3a at snip.net
> 
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>