[WriteLog] WriteLog TELNET configuration HELP

[Scot Herrick]

Daniel,
 
If you are configuring Telnet, you should not be trying to connect to the Internet Logbook. I assume you are using Telnet to access Packet spots from a cluster.
 
To do that, click on 'Window,' then Packet Window.
 
At this point, a new window will open called 'WriteLog Packet Terminal.'
 
In the WriteLog Packet Terminal window, click on 'File' and select 'Telnet.' This will produce a dialog box and you can enter in the IP address and port for the cluster to which you hope to telnet to.
 
Hope this helps...
 
Scot, K9JY

gilles <ve2lx at sympatico.ca> wrote:


hello to all
PEASE HELP help

we tried to configure TELNET but did not successed.
we go tools/connect to internet logbook

then in the window 4 items to fill
1......name of operator = A
2......address of the URL ( we choose...... 66.1.40.120 from ab7aa 
from internet page
3......computer anme fond by W.L. automatically
4......protocol......we choose......Tcp/IP
but then there is always a popup window not sastisfied
and answering activate disconnect from the internet lobook

is there a member of the groupe that could give an help
> Daniel ve2sb sent by ve2lx

> please answer to him at ve2lx at sympatico.ca
> and to the groupe if it is of the groupe interest
> I am in moving periode having a knew house at the suburn

Daniel VE2SB by VE2LX

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/