[WriteLog] ICOM baud rate etc. when using microKeyer

[Jim Reisert AD1C]

--- Jim Reisert AD1C <jjreisert at alum.mit.edu> wrote:

> I installed the microKeyer this weekend and I noticed that when my IC756 
> Pro is connected, the microHAM USB Device Router (3.0.2) reports "4800 N82".
> I have my baud rate set to 4800 but I thought ICOM radios used one stop bit,
> not 2.
> 
> Is this a problem in the Writelog radio config, and if so, how do I change
> it?  Or does it matter?

Larry W0QE says it shouldn't matter, but I was able to find the line in my
writelog.ini file (under [RIGS]) and change it from N82 to N81

73 - Jim AD1C


--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert at alum.mit.edu>, http://www.ad1c.us