[WriteLog] M/2 in a M/M environment

[Michael Braun N3CA]

Alright, that's what I needed. Will use A/B - I was confused before about
Run/Mult becasue both will be run in the m/2 scenario.
 Thanks,
Michael N3CA
 On 10/26/05, steve at stevebb.com <steve at stevebb.com> wrote:
>
> Hi Michael,
>
> I have been setting up our station today to do exactly this !
>
> Both computer screens will log the callsigns, on one station an "A" is
> assigned after each QSO (on the far right of the screen after the ZM, CM
> and
> pts) , the other station will have "B" assigned.
>
> I take it you already have the network connected (under Setup > register
> to
> accept network connection and then > Link to network).
>
> Following on from this under the Radio tab > this radio is Run A radio and
> on the opposite station do exactly the same as the line above but select >
> this radio is Mult B radio.
>
> Press ALT-G and type something (ie network chat) and see if it comes up on
> the opposite pc. (This is a quick way to check if the network is running
> ok)
>
> Then type some dummy calls on each and look to see if the calls come up
> together with their associated A&B annotation.
>
> Finally, before you start the contest, go to Tools > parameter setup and
> enter your zone (for CQWW SSB or whatever contest you intend entering) - I
> sometimes forget this duh !!!
>
> It is pretty straightforward to setup (this is what I love about Writelog
> !!) and went together a treat without resorting to the help.
>
> I hope this quick crib will help you and others that are looking for an
> answer !!
>
> If you need further help then let me know and if you hear me on as G6M
> then
> please give me a shout this weekend :-)
>
> Best wishes,
>
> Steve G4KIV/ZC4BS
>
>
>
>
> Homepage: http://www.stevebb.com
> Photo portfolio: http://www.usefilm.com/member/steveb
> Shutterpoint: http://STEVEBB.shutterpoint.com
> Email: steve at stevebb.com
>
>