[WriteLog] K9MI USE Direct I/O

[David Hachadorian]

----- Original Message ----- 
From: "ukbrown" <ukbrown at acsol.net>
To: <writelog at contesting.com>
Sent: Sunday, May 14, 2006 7:08 PM
Subject: Re: [WriteLog] K9MI USE Direct I/O


> I'm going to need to start using an lpt port while using
> WriteLog. Just
> curious if users of WriteLog have a favorite between
> direct-io and User
> Port.
>
> Thanks, Mike K9MI
>
> USE DIRECT I/O it really works and is easy to use..trust
> me...not a techie here. PTL bill K0UK

I agree. Use K2QMF's setup procedure:
---------------------------------------

Anyway here is the way to do it:
1 - Open the Direct I/O control panel.
2 - In the I/O Ports Tab enter the BEGIN and END address.
      For LPT1 it is  378  and  37A.
3 - Click ADD button ( This is the step they left out)..
4 - Go to the SECURITY Tab
5 - Click BROWSE button and locate writelog directory.
6 - From there locate writelog\Programs\WriteL32.exe and 
click OPEN
7 - Click ADD.
8 - Close Control Panel...

That's it!!  It works great....    Good Luck.
------------------------------------------
Dave Hachadorian, K6LL
Yuma, AZ










































.