[WriteLog] Rig Control PROIII

Gary Senesac AL9A al9a at pobox.mtaonline.net
Sat Sep 2 16:52:07 EDT 2006


Two choices here Bob:
1. Upgrade your version of WL to one that has the drivers for the PROIII.
2.  Change the default CI-V hex address of the PROIII to that of  the PROII 
so that it communicates with WL as though it were a PROII.  I believe the 
CI-V address of the PROIII is 6Eh.  Go into the setup menu of the rig (on my 
IC-756PRO I press the Set/Others options on the menu screen - yours may be 
different so check your manual) and scroll down through the menu items until 
you find the CI-V Address line.  Change the 6Eh setting to 64h which is the 
PROII.  Reboot WL and it should now communicate with the PROIII since it is 
talking to WL like a PROII.

One caution note.  If you interface the rig to other software, such as a 
logger program, MMTTY, etc. you will either have to change the rig address 
back to its default or change the software to the PROII values to get things 
working right with those programs.  Good luck.

73,
Gary AL9A

----- Original Message ----- 
From: "Bob Jensen - aa7fk" <aa7fk at hotmail.com>
To: <writelog at contesting.com>
Sent: September 02, 2006 6:17 AM
Subject: [WriteLog] Rig Control PROIII


> Morning,
>
> Need some help with getting Rig Control to work in my old WriteLog version
> 10.52F with my new PROIII.
>
> I formerly had my Icom 761 working just fine in WriteLog using rig 
> control,
> using com port 4 and IDing the rig as 761.  Everything worked fine.
>
> Bought the new 756PROIII, and though my version only lists the PROII ..
> listing it would not work.  So is there something I need to change ?  If 
> so
> where and how? :-).
>
> I must not be the first to have this problem, so would appreciate help 
> (I'm
> not a tech computer savvy guy :-)
>
> And I know the port works cuz my logging program ProLog2k, works just fine
> with the new PROIII and rig control.
>
> THANKS
>
> Bob AA7FK
>
> _________________________________________________________________
> All-in-one security and maintenance for your PC.  Get a free 90-day trial!
> http://www.windowsonecare.com/trial.aspx?sc_cid=msn_hotmail
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 



More information about the WriteLog mailing list