[WriteLog] Subject: Serial port problem

[D. Drake]

I had the exact same problem with MMTTY when I installed a SIIG 8 port PCI 
serial card.

Didn't have the problem when I used an older SIIG 4 port PCI serial card.

I was able to work around the problem by switching the MMTTY interface over 
to COM1 which is the com port native to the mother board.

I wonder if you are using an aftermarket I/O board?

I suspect my problem is in the driver software with my new card.

Would be interested in seeing a post to the reflector if you find a fix.

I posted the problem to the MMTTY yahoo group but got no helpful response 
and found no help on the SIIG web site.

73,
Dale AA1QD


>Date: Fri, 6 Apr 2007 11:52:59 -0500
>From: "Robert Redmon" <k5sm at attwb.net>
>Subject: [WriteLog] Serial port problem
>To: <writelog at contesting.com>
>Message-ID: <20070406165330.52FC436D373 at mail.wildblue.net>
>Content-Type: text/plain; charset="us-ascii"

>This is not really a Writelog issue, but related.  I am trying to get MMTTY
>to key FSK on the TXD line of the same serial port I am using for PTT. 
>When
>I attempt to select the Com TXD option on the MISC menu, the computer
>crashes and restarts. Any ideas?

>Bob K5SM