[WriteLog] (no subject)

[Gary Senesac AL9A]

Per the WriteLog Help manual:

There are 4 "slots" available for WriteLog rig interfacing. By default, 
CommSlot1 is COM1:, but you can change that by changing the number on the 
right of the equal sign. These settings are not used for RTTY or for packet

CommSlot1=1
CommSlot2=2

In this example, the third and fourth slots are on COM7 and COM8. COM15 is 
as high as is supported.

CommSlot3=7
CommSlot4=8

Your CommSlot1=5 setting would go in the [PORTS] section of the writelog.ini 
file.

Gary AL9A


----- Original Message ----- 
From: "George Rickley" <Grickley at comcast.net>
To: <writelog at contesting.com>
Sent: August 27, 2007 11:43 AM
Subject: [WriteLog] (no subject)


> Hi All,
>
>
>
> How and where do I use the CommSlot1=5 command?
>
>
>
> Thanks,
>
> George K1MA
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/