[WriteLog] TS-870

[Georgens, Tom]

The TS-850 setting was added by Wayne at my request a few years back.
The default Kenwood setting would not work correctly for split
frequencies.  If you typed in a split frequency, it would load up the
VFO's with the right frequencies but would not actually split them.
Other than that, the Kenwood setting worked fine.

73, Tom W2SC 

-----Original Message-----
From: Bob Henderson [mailto:bob at 5b4agn.net] 
Sent: Friday, February 09, 2007 7:07 PM
To: Hal Kennedy; writelog at contesting.com
Subject: Re: [WriteLog] TS-870

Hal

You'll probably see Kenwood & Kenwood TS850 on the list.  So far as I am
aware all Kenwood radios use the same command set.  I am not sure why
the 850 has a specific listing.  Maybe it's the exception.  I've used a
TS870 successfully with the vanilla Kenwood selection, though not for
some time.

73

Bob, 5B4AGN

----- Original Message ----- 
From: "Hal Kennedy" <halken at comcast.net>
To: <writelog at contesting.com>
Sent: Friday, February 09, 2007 9:09 PM
Subject: [WriteLog] TS-870


> Can someone confirm for me that a TS-870 will fire up using the
setting 
> for
> TS-850?  TS-870 does not show up as one of the supported rigs.
>
> Thanks
> Hal
> N4GG
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 

_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/