[WriteLog] WriteLog Timer Issue

[Jim]

Thank you for your suggestions (Goetz and Bill). I knew it has to be
something simple and your suggestions did fix the issue.


--
Jim
www.ww8q.org


> -----Original Message-----
> From: Bill Gillenwater [mailto:gillie at pa.net]
> Sent: Thursday, October 25, 2007 10:29 AM
> To: jim at ww8q.org
> Subject: Re: [WriteLog] WriteLog Timer Issue
> 
> Jim, set the timer for 11 or 12 seconds. The timer is starting to count
> when the message begins, a longer delay will fix the problem.
> 
> 73 Bill K3SV
> 
> 
> 
> 
> 
> Jim wrote:
> > Hello, I have a problem with the Alt-T (Timer) in WriteLog. Here is the
> > issue; when I bring up the window and set the timer to, for example five
> > seconds, the timer will activate five seconds after pressing the F1 key
> (CQ
> > macro), which I assume is what it is suppose to do. Then five seconds
> later,
> > it sends the CQ macro again, but it keeps sending the macro over and
> over
> > again without pausing after the 5 seconds. My Macro is as follows: %R CQ
> > TEST WW8Q WW8Q CQ %E
> >
> >
> >
> > I must be missing something, but have not been able to figure this one
> out.
> > Any help would be appreciated.
> >
> >
> >
> > Thanks in advance,
> >
> > Jim
> >
> > www.ww8q.org
> >
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog at contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> >
> >