[WriteLog] MMTTY engine with WriteLog and stereo soundcard

[Eric - VE3GSI]

Al,
One STEREO sound card will easily support SO2R, that is how I do it here.  I
am not at my radio computer at the moment, but the secret is in the MMTTY
set-up. Look for an option to choose both, left or right input.  You also
need two occurrences of MMTTY installed on your computer. I do it something
like this C:\MMTTY_L and C:\MTTY_R. Make sure you have the WL plug-in for
using MMTTY with WL, put the focus on rig one and when asked point to the
MMTTY_L file, next put the focus on rig two and do likewise with MMTTY_R.
You must treat the two installs separate from the other or any other
installs of MMTTY on your computer that you might be using for rag chewing.

If you have a microHAM interface the documentation is provided in the help
files.

If you are still stuck, let me know and I will be back to the radio computer
later today.
Merry Christmas,
Eric- Ve3gsi



> -----Original Message-----
> From: Alfred Frugoli
> Sent: December-22-08 12:43 PM
> To: writelog
> Subject: [WriteLog] MMTTY engine with WriteLog and stereo soundcard
> 
> All of the clear documentation on using the MMTTY engine shows that it
> is
> necessary to have 2 soundcards, however I found one reference to using
> a
> stereo sound card to decode two VFO's or two radios.  Unfortunately,
> this
> reference didn't have any info on how to set this up in MMTTY.  I'd
> love to
> use the MMTTY engine in an SO2R configuration with WriteLog but dcon't
> currently have a 2nd sound card.  Am I out of luck?
> 
> Thanks.
> 
> 73 de Al, KE1FO