[WriteLog] Using MMTTY with WriteLog

[Joe Subich, W4TV]

If your USB to serial adapter does not support 5bit codes 
at 45.45 baud (e.g., if you must use EXTFSK for MMTTY in 
stand alone mode), the MMTTY plug-in will not work. 

The MMTTY plug-is does not permit the use of EXTFSK and 
WriteLog's "Software generated FSK (TxD)" is only valid for 
RTTYrite (the native RTTY support with Sound Board FSK or 
Stereo Sound Board FSK).  

73, 

   ... Joe, W4TV 
 



> -----Original Message-----
> From: writelog-bounces at contesting.com 
> [mailto:writelog-bounces at contesting.com] On Behalf Of Rick Lindquist
> Sent: Saturday, March 01, 2008 7:21 PM
> To: writelog at contesting.com
> Subject: [WriteLog] Using MMTTY with WriteLog
> 
> 
> Well, I'm stumped again. Even after reviewing (and reviewing) the fine
> tutorials by Don, AA5AU, I still cannot get the MMTTY module 
> to transmit FSK
> RTTY with WriteLog. MMTTY works fine as a standalone program from its
> currently assigned COM port (7), and I can even get Rittyrite 
> to transmit
> FSK (from the type-ahead buffer; there don't appear to be any 
> memories -
> just a funky little tuning screen with a very slow response time). 
> 
>  
> 
> After selecting the COM 7 under Rittyrite's Ports menu, then "Software
> generated FSK TXD," the "COM-TxD(FSK)" choice in the MMTTY 
> Setup MISC screen
> is grayed out. At one point, I got MMTTY/WriteLog to key the 
> radio, but it
> just transmitted a carrier, not RTTY. 
> 
>  
> 
> I'm using a RIGblaster Plus on COM 7 via a USB - >RS-232 
> adapter. The radio
> is an ICOM IC-756PROIII. I had been using the general DXCC 
> tracker logging
> module, but it still would not work after I loaded an RTTY 
> RoundUp contest
> module.
> 
>  
> 
> Any ideas or suggestions? Many thanks! 73, Rick, N1RL
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/