[WriteLog] Writelog and ICOM CT-17 level converter

[Eric - VE3GSI]

Hi Dick,

If you have not discovered by now, with WriteLog and Icom rigs you can not
use auto anything. 

- In the radio menu, select a baud rate and use the default address for that
rig. Hint, use 9600 baud to start, experiment with higher speeds later.

- In the WriteLog Port Set-up menu, select the correct serial port, match
the rig baud rate and choose the correct radio. Be sure to have Poll =
Checked and Comm PTT = No

- If you don't see the rig frequency on the button beside the Entry window
in WL, click on it, from the log QSO dropdown menu, select the correct port.

73 Eric - VE3GSI


> -----Original Message-----
> From: Dick McQuillan
> Sent: March 10, 2008 4:58 PM
> To: writelog at contesting.com
> Subject: [WriteLog] Writelog and ICOM CT-17 level converter
> 
> 
> I cannot get Writelog to recognize my ICOM CT-17 level converter, and 
> have to manually change
> bands from within Writelog.
> 
> The IC-17 level converter works fine with MMTTY however
> 
> Any help will be appreciated
> 
> Dick
> VA7DM
>