[WriteLog] Cut Numbers

[Art Searle W2NRA]

Speed up the CW speed for the 599 portion of the report and then and then 
slow it down after.

73 Art W2NRA
"Keep to the Code!"
w2nra.com
----- Original Message ----- 
From: "Gary AL9A" <al9a at mtaonline.net>


> Glad it worked for you John.  But you've raised my curiosity!  What is the
> purpose of the <<<< and >>>> characters surrounding the 5nn?
>
> 73,
> Gary AL9A
>
>
> ----- Original Message ----- 
> From: "John Muzyka" <g4rcg at yahoo.co.uk>
> To: "Gary AL9A" <al9a at mtaonline.net>
> Cc: <writelog at contesting.com>
> Sent: March 17, 2008 1:38 PM
> Subject: Re: [WriteLog] Cut Numbers
>
>
>> Hi Gary,
>>  No space before the C I checked, and I was NOT using the N command, this
>> was my line
>>
>>  %c %bqso b4 tu g4rcg k %b<<<<<<5nn>>>>>> %3 bk
>>
>>  So now I have put the N in as so :-
>>
>>  %c %bqso b4 tu g4rcg k %b<<<<<<5nn>>>>>> %n3 bk
>>
>>   Now it works fine, I did not know abot the "N" command, many thanks I
>> have only been using WL for 4 years hi!!
>>  Cheers
>>  John G4RCG
>>
>>
>>
>>
>>
>> Gary AL9A <al9a at mtaonline.net> wrote:
>>  Your [Cut-Numbers] section looks ok, but there appears to be a space 
>> just
>> before the [C. I don't know if that's a problem or not. Are you also 
>> using
>> the %N command in your CW message? That command is required to make the
>> cut-numbers work. For example, %N3 will send three digits, padded with
>> leading zero's if necessary, followed by what ever cut-numbers have been
>> specified. Good luck.
>>
>> 73,
>> Gary AL9A
>>
>>
>>
>> ----- Original Message ----- 
>> From: "John Muzyka"
>> To:
>> Sent: March 16, 2008 7:04 AM
>> Subject: [WriteLog] Cut Numbers
>>
>>
>>> Can some one just help me out with this, I cant find it in the archives
>>> and I know it will be how its set up in the 1st line, but my cut numbers
>>> dont work, take a look at them below taken from my .ini file
>>>
>>> [Cut-Numbers]
>>> 0=t
>>> 1=1
>>> 2=2
>>> 3=3
>>> 4=4
>>> 5=5
>>> 6=6
>>> 7=7
>>> 8=8
>>> 9=N
>>>
>>> What is wrong??
>>> Cheers
>>> John G4RCG