[WriteLog] COM 6

[Gary AL9A]

Bill,

Not sure if you're inquiring about comport assignments in WL or DXB2007?  If 
it's WL, the answer is in the help manual under Writelog.ini [Ports].

There are 4 "slots" available for WriteLog rig interfacing. By default, 
CommSlot1 is COM1:, but you can change that by changing the number on the 
right of the equal sign. These settings are not used for RTTY or for packet

CommSlot1=1
CommSlot2=2

In this example, the third and fourth slots are on COM7 and COM8. COM15 is 
as high as is supported.

CommSlot3=7
CommSlot4=8

73,
Gary AL9A

----- Original Message ----- 
From: "Bill Parry" <bparry at rgv.rr.com>
To: <writelog at contesting.com>
Sent: November 05, 2008 4:58 AM
Subject: [WriteLog] COM 6


>I remember a discussion a while back regarding adding more options for
> comports. My version of DXBase 2007 only allows Com 1 - 4 and I need com 
> 6.
> It seems there was a file to modify... can anyone refresh my memory?
>
> Bill W5VX
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/