[WriteLog] Winkey USB CW keyer and WL?

[hank k8dd]

----- Original Message ----- 
From: "Jerry Flanders" <jeflanders at comcast.net>
To: "Alan Maenchen" <ad6e at arrl.net>; <writelog at contesting.com>
Sent: Wednesday, September 10, 2008 1:46 PM
Subject: Re: [WriteLog] Winkey USB CW keyer and WL?


> Thanks to all who helped, both privately and here.
>
> My Commslot commands work OK. Someone mentioned using a "winkey 2"
> selection in setup - I only have a winkey type available. You guys
> that have it working - is it Winkey, or Winkey 2?

There are two versions Winkeyers.

The older one, with the speed control on the top of the box is, in Writelog, 
called
"K1EL Winkey" and it has a serial interface.

The newer one, with the speed control on the front and four memory buttons 
(1 red
and 3 black) is, in Writelog, called "K1ELWinkey 2".  The box says 'WinKeyer 
USB'
and it has a USB interface.

If I remember correctly, the option for "K1EL Winkey 2" started to appear in
version 10.68F.  Before 10.68F there was only "K1EL Winkey" -- and that 
worked
with both versions of the WinKeyer, but did not support all  the functions 
of the
WinKeyer USB (most notably port switching for SO2R).

73    Hank    K8DD