[WriteLog] CAT Problems with FT2000D

[Joe Subich, W4TV]

> By the way, I am using Writelog 10.69D
> 

COMn_RTS_INIT was added in Writelog 10.70.  There is no way to 
disable handshake in 10.69. 

I suspect it's time to download the update if you're current 
on support (the current public version is 10.73) or renew 
support if you are not current.

73, 

   ... Joe, W4TV 
 




> -----Original Message-----
> From: Aldewey at aol.com [mailto:Aldewey at aol.com] 
> Sent: Monday, December 14, 2009 10:20 PM
> To: lists at subich.com; gibit at xtra.co.nz
> Subject: Re: [WriteLog] CAT Problems with FT2000D
> 
> 
> In a message dated 12/14/2009 10:21:31 AM Central Standard 
> Time, lists at subich.com writes: It does but you also need to 
> disable RTS/CTS handshake in WriteLog 
> FT-2000 driver.  See the information for COMn_RTS_INIT in the [RIGS] 
> section of the WriteLog Help file. 
> Joe or John;
> 
> Still no luck.  Also, I do not see any reference to the HELP 
> about COMn_RTS_INIT in the Writelog HELP under either the 
> [RIGS] Section or the [PORTS] Section.  Below is how I have 
> things set up. I guessed at how to set up the RTS_INIT.   Do 
> you see what I am missing?  Again the rig is connected to 
> COM5 and I am using a 3 wire cable that works fine on the 
> MarkV.  I have CAT RTS turned off in the rig , the CAT BPS 
> rate set to 4800.
> 
> By the way, I am using Writelog 10.69D
> 
> Any suggestions
> 
> 73,
> 
> Al, K0AD
> 
> [Ports]
> COM1:=9600,n,8,1
> COM2:=9600,n,8,1
> COM3:=9600,n,8,1
> COM4:=4800,n,8,1
> COM5:=4800,n,8,2
> COM6:=4800,n,8,2
> COM7:=4800,n,8,1
> COM8:=4800,n,8,1
> CommSlot1=1
> CommSlot2=5
> CommSlot3=6
> CommSlot4=7
> CWPTTCONTROL=2
> CWPTTDELAY=0
> dvktype=3
> dvkport=4
> cwtype=2
> cwport=6
> dvkstoploop=1
> dvkechomic=2 Comm7igManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm7XmitControl=WAIT
> Comm8Used=USED,POLL,17 
> Comm8RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm8XmitControl=WAIT 
> Comm7RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm5Used=USED,POLL,17 
> Comm5RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm5XmitControl=ALWAYS
> Comm6Used=USED,POLL,56 
> Comm6RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
> Comm6XmitControl=ALWAYS
> [RIGS]
> Com5_RTS_INIT=0
>