[WriteLog] WriteLog presets available?

[Roger Rehr]

Hi All,

I have a few questions for which I couldn't find the answer by reading  
the help files / pdf 'manual' or in the archives.  I suspect the  
answer is there, but I just couldn't find it.

1.  I want to bring up WriteLog with 4 radios.  Every time I start it  
it only shows two, and I have to go to the Radio Menu and select  
"Number of Radios" and then "4".  I figured there might be an ini file  
setting to preselect 4 but I couldn't find one.

2.  I want WriteLog to come up with the radio in the COMM4 position  
[which uses COM2] set to be the Left Radio and the Active Radio,  
communicating with the radio on COM2 as WriteLog starts, rather than  
having to set things manually.  Are there ini file settings to do  
this? [I already have it set to COM2 in the ini file].

3.  I want to force each of the WriteLog radios to have only a limited  
number of bands be selectable, in order to prevent the operator from  
changing the band of his radio to a band it does not actually have.   
This represents a limited selection of as few as 1 to as many as 5  
bands, depending on the operator's position.  Again, I thought there  
might be an ini setting for this but couldn't find one.  Something  
like COMM1: 432; COMM2: 903; COMM3: 1296; COMM4: 2304, 3456, 5760,  
10368, 24192.


If these can't be preset, then I'll just keep setting things manually  
when powering up.  But if they can be preset, I'd like to know how.

Thanks in advance!

73,

Roger Rehr
W3SZ
http://www.nitehawk.com/w3sz/osxhpsdrserver.htm