[WriteLog] M2 10 minute timer

[hank k8dd]

I found the same thing for Multi Single in WPX CW ..... and never got an
answer here.
Dollar store 10 min timer on top of the radio worked!

73    Hank    K8DD


----- Original Message ----- 
From: "Bruce Meier" <bemeier at bellsouth.net>
To: "'WriteLog'" <Writelog at contesting.com>
Sent: Tuesday, July 14, 2009 9:52 PM
Subject: [WriteLog] M2 10 minute timer


>I am having trouble following the instructions to set the timer for a M2
> operation for NAQP.
>
>>From WL HELP:
> For this window to run keep both the top and bottom displays current, you
> configure the logbook for logging RUN or MULT QSOs (or Mulit-2 A/B QSOs).
> Otherwise, WriteLog counts all the QSOs as RUN (A) and only the top row in
> this window updates. You use the Radio This is RUN (A) Radio/This is MULT
> (B) radio menu entries. The first time you select one of these, WriteLog
> asks to add the "m" column to the log, which is necessary for multi-single
> operation. This same "m" column will become the "txid" column in the
> Cabrillo output.
> For Multi-two operation, ignore the RUN/MULT designation and just use the
> A/B designation. WriteLog will label the two rows in the display
> accordingly.
> QUESTION:
>
> How do I configure my logbook for Multi-2 A/B QSOs?     I can make the
> timers count for 10 minutes after running on both stations and then the
> indicator turns green.  Then after making another QSO on the band that
> indicates BAND CHANGE OK - it goes back to counting again.
>
> I would think it should stay as BAND CHANGE OK as I did not change bands.
>
> HELP !!
>
> Thanks and 73,
> Bruce - N1LN
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/