[WriteLog] Interface problem

[Bill Gillenwater]

Bill, have you tried changing the COM port number? Maybe COM2 or COM3. I 
would think that the problem is in the Port Setup. If the cable is connected 
etc it should work. What version of Writelog are you using?
73 Bill

----- Original Message ----- 
From: "Bill K2OWR" <k2owr at comcast.net>
To: <writelog at contesting.com>
Cc: <k5dj at writelog.com>
Sent: Tuesday, November 17, 2009 10:13 AM
Subject: [WriteLog] Interface problem


> :::: Uh,oh. Nobody?......I'm in trouble.
>
>
> I wrote:
>>
>>>:::: I am using Com1 on my computer, which I know works because I use it 
>>>for Ham Radio Deluxe all the time.
>>>My interface cable is a 9 pin serial and I have checked for end to end 
>>>continuity on all pins, and it's fine.
>>>
>>>I select Com1 in the setup menu, choose my radio, (Yaesu FT950) and hit 
>>>ok.
>>>The WL screen says "no radio" and when I click on a dx spot, it appears 
>>>in the logging area, but does not make the radio go to the frequency. I 
>>>don't believe the radio is "handshaking" with WL at all.
>>>
>>>Any ideas....anyone?
>>>
>>>BILL
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/