[WriteLog] MMTTY Plug In setuo

[Joe Subich, W4TV]

Gary,

> I have selected Com 6 under Rittyrite Ports and have also 
> selected Software Generated FSK TXD in that menu.  On the 
> MMTTY Plug In Setup menu on the Misc tab the Tx Port box 
> shows the Sound radio button selected and the other two 
> choices grayed out.

Selecting the Software Generated FSK options causes RTTYrite 
to hold onto the FSK port.  It generates the FSK directly 
and but does not work with DigiKeyer, microKEYER, microKEYER 
II and MK2R/MK2R+. 

The two FSK choices are grayed out because MMTTY can not 
open the FSK port.  UNCHECK "Software Generated FSK TxD" 
in RTTYrite and select the "C: Limiting Speed" option from 
the "USB Port" button in MMTTY's MISC tab.  Also check the 
"PTT" box on the FSK port in Router. 

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: writelog-bounces at contesting.com 
> [mailto:writelog-bounces at contesting.com] On Behalf Of Gary AL9A
> Sent: Tuesday, September 22, 2009 2:06 AM
> To: Writelog Reflector
> Subject: [WriteLog] MMTTY Plug In setuo
> 
> 
> Ok, I'm now joining the multitudes of confused folks trying 
> to setup the 
> MMTTY plug in for the CQ WW RTTY contest coming up.
> 
> I have the full MMTTY program installed at C:\MMTTY and it 
> runs fine with my 
> Microkeyer II.  In the Microkeyer II Router I have Com 1 set 
> for PTT, Com 2 
> set for CAT and Com 6 set for FSK.
> 
> I've installed the MMTTY plug in (under Vista Home Premium - 
> 32 bit) and 
> have gotten MMTTY to show in the Rttyrite screen under TU 
> type by coping the 
> pertinent writelog.ini lines from C:\Windows\writelog.ini to 
> the real ini 
> file in the Virtual Store.  After getting an error message 
> about being 
> unable to open the sound card I manually selected the 
> Microkeyer II Line as 
> the input and am getting random characters printing on the 
> Rittyrite screen 
> and noise showing on the XY display in the MMTTY control panel.
> 
> I have selected Com 6 under Rittyrite Ports and have also 
> selected Software 
> Generated FSK TXD in that menu.  On the MMTTY Plug In Setup 
> menu on the Misc 
> tab the Tx Port box shows the Sound radio button selected and 
> the other two 
> choices grayed out.  According to the plug in help section at 
> AA5AU's web 
> site, the grayed out boxes indicate the port is not set in 
> the Rittyrite 
> Ports menu, but it is -Com 6???  What am I doing wrong?  
> Device manager says 
> all the necessary virtual ports are there.
> 
> 73,
> Gary AL9A
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com 
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/