[WriteLog] SIIG 4 Serial Port number change
n9io at hotmail.com
Mon Sep 28 11:19:04 PDT 2009
Pending on the SIIG card you should be able to go into Control Panel,
and Hardware Devices, Com Ports and change Com 5,6,7 and 8 to
Com, 2,3,4 and 5 since you already have Com 1 on your motherboard.
At least that's what I have done with mine.
The SIIG cards only use one free IRQ for all 4 ports, it's slick and works nice as you know.
I find them on eBay occassionally for a song with the dongles.
Anyway, I'll get back to you tonight or on Tuesday.
Clay Melhorn N9IO Bonfield, IL
KARS - Kankakee Area Radio Society - W9AZ http://www.w9az.com/
ARRL (Central Division) http://www.central.arrl.org/
> From: Aldewey at aol.com
> Date: Sat, 26 Sep 2009 00:27:00 -0400
> To: writelog at contesting.com
> Subject: [WriteLog] SIIG 4 Serial Port PCI Board and MMTTY
> I am having trouble getting my new SIIG PCI 4 Serial Port board to key FSK.
> I have a PC with one built in Serial Port. The built in serial port (at
> COM 1) keys FSK no problem.
> When I install the SIIG board, it adds COM 5, 6, 7, and 8.
> I use COM 5 and 6 for Rig control with no problem. However, if I select
> COM 7 or 8 to key FSK in MMTTY, my PC crashes and immediately re-boots. I
> temporarily took the radio off of COM 5 and 6 and tried those for FSK - same
> result. No matter what port I chose on the SIIG board, selecting it to key
> FSK crashed my computer. It crashes as soon as I make the selection in RTTY
> Operating System is XP.
> Has anyone run into this issue? Any suggestions on what I might try?
> Al, K0AD
> WriteLog mailing list
> WriteLog at contesting.com
> WriteLog on the web: http://www.writelog.com/
Bing™ brings you maps, menus, and reviews organized in one place. Try it now.
More information about the WriteLog