[WriteLog] WL & MMTTY Problem (again/still)

[Joe Subich, W4TV]

What are you using for an interface?

Are you using FSK or AFSK?

Are you using a hardware serial port or a USB to serial converter?

MMTTY always generates PTT on both the RTS and DTR lines of the
port used for FSK.  If you are using AFSK you can assign a port
in RTTYrite and MMTTY will use it for PTT even though it does not
provide FSK on the TxD line.

 > I have a feeling this is a problem for me with the later versions of
 > WL, as it was working o.k. before. I guess I could bring back an
 > earlier version to be sure.

What do you have selected for CW - are you using a K1EL WinKey or
"computer generates?"

73,

    ... Joe, W4TV

On 8/21/2010 10:27 AM, Dave Earnest wrote:
> No PTT!
>
> Running WL 10-78K and latest MMTTY plug-in.
>
> MMTTY works Fine in stand alone. Rig control o.k. on one comport and
> PTT OK on another comport.
>
> No PTT using Rttyrite!
>
> MMTTY is there under TU and correct comport is selected.
>
> I have a feeling this is a problem for me with the later versions of
> WL, as it was working o.k. before. I guess I could bring back an
> earlier version to be sure.
>
> Also, in the past, when computer was booting up, I would get a few
> transmitter PTT actions as the initializing was going on. That is not
> happening now.
>
> Help!
>
> Dave Earnest, K7JJ k7jj at arrl.net
> _______________________________________________ WriteLog mailing
> list WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog WriteLog on the
> web:  http://www.writelog.com/
>