[WriteLog] Cabrillo output

[Dick Green WC1M]

So why has this become a problem now? I've used the same technique to
successfully send my log for years: I generate the Cabrillo log and tell
Writelog to email it. The email comes up and I hit Send. I've never had to
select Plain Text in the past. Why now? Has there been a change in how
Writelog interfaces to the email client, or has there been a change in the
robot such that it now can't extract an attachment from an email in HTML
format?

One way or another, I think this is a bug.

73, Dick WC1M

-----Original Message-----
From: Jim Reisert AD1C [mailto:jjreisert at alum.mit.edu] 
Sent: Sunday, December 05, 2010 12:48 PM
To: VE3XD
Cc: w5xd at writelog.com; writelog at contesting.com
Subject: Re: [WriteLog] Cabrillo output

On Sun, Dec 5, 2010 at 10:17 AM, VE3XD <ve3xd at rogers.com> wrote:

> That's very interesting. I usually switch to Plain Text when I send a
message to a Mail Archive but
> as you said since there was no text body I did not switch from HTML. If
that is the problem (and
> I'll resubmit to see) then the issue no doubt is with the robot and not
the log.

No Don, as Wayne pointed out, it's not the log OR the robot.  It's the
configuration of your E-mail program.

73 - Jim AD1C

-- 
Jim Reisert AD1C, <jjreisert at alum.mit.edu>, http://www.ad1c.us