[WriteLog] DVK with SO2R

[VK4TI]

The only addition is with a dynamic mike like a heil you need to boost the drive audio. Little behringer mixer works fine or any small line level audio amplifier   
If you use a PC  designed mike then there is no need for the amp. The voice shaper is also very good to use to route the audio 

VK4TI

Trent Sampson 
0408 497550


On 09/12/2010, at 10:11 PM, <n1jez at burlingtontelecom.net> wrote:

> Hi Dennis,
> 
> I hadn't consider this... It would probably work. I will need to pad the 
> laptop soundcard output. It's line level and I need mic level, but that's 
> easy.
> 
> Tnx,
> Mike
> 
> ----- Original Message ----- 
> From: "Dennis" <egan.dennis88 at gmail.com>
> Subject: [WriteLog] DVK with SO2R
> 
> 
>> MIke
>> 
>> Why do you want to use the Rigblaster?  The SO2R Box handles audio 
>> switching of the mike lead.
>> 
>> Plug the mike into the computer.
>> Plug the computer output into the SO2R Box Mike Lead
>> Plug the R1 and R2 Mike outputs into the mike input of the rigs.  If you 
>> have a K3, you can use the Line inputs.
>> Adjust your levels and you're good to go.
>> On the SO2R Box, make sure that "Mic Relays" box is checked.
>> 
>> The SO2R Box has everything shielded and transformer isolated and works FB 
>> as a mike audio switcher.
>> 
>> Dennis w1UE
>> 
>> 
>> 
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/