[WriteLog] rtty Red Dot next to qso

[Gary AL9A]

Also running 10.75N, but don't think that's the problem.  I had the same 
issue for the first 2 QSO's in the contest.  Then discovered nothing was 
being populated to the Band Map and my freq. box showed no radio.  About two 
days ago I updated the Microham router to the latest version so I 
immediately suspected something wrong there.  That was it - some how my CAT 
port, Com2, had been set to None.  When I reset it back to Com2 the radio 
and the pc immediately started talking again and there were no further 
problems.  I got rid of the red B's by right clicking the record and 
selecting "Mark QSO as claimed".  You don't mention your computer interface, 
but I bet there is a problem somewhere in the hook up preventing the freq 
from being read into WL.

73,
Gary AL9A



----- Original Message ----- 
From: "K0BX" <k0bx at arrl.net>
To: "Writelog Reflector" <writelog at contesting.com>
Sent: February 13, 2010 1:02 PM
Subject: Re: [WriteLog] rtty Red Dot next to qso


>I am in the CQ WW WPX RTTY contest using the latest version of WL 10.75N
> and I started getting the RED B next to the QSO.  Comes to find that the
> frequency is either no in the log or it is a freq out of the band.  I
> never had this happen before.  It could be RF, but same station I have
> been using for years.  It so far as happened 5 times in the first 20
> qso;s.  This is the 1st contest using 10,75N.
>
>
>
> Joe K0BX
>
> Stop the insanity!
> Please do not add me to any distribution lists (Joke, Stories or Junk)
> without my permission.
>
>>
>>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/