[WriteLog] WriteLog - MK II statup problem

[Gary AL9A]

Now when I start WL in CW mode the MK II Line input is working, the memory 
message keys send, but the Rittyrite screen is dead or at least appears to 
be dead.  There are not many CW signals that I can hear at the moment, but 
Rittyrite is not even printing garbage characters from the noise.  It seems 
as though there is no input going to Rittyrite even though the MK II Line 
LED is solid.  I will try it again later when the band picks up in hopes I 
can find a few CW stations to monitor.  Not trying record anything, just 
trying to monitor.  Anyone have a clue?

73,
Gary AL9A

----- Original Message ----- 
From: "Gary AL9A" <al9a at mtaonline.net>
To: <writelog at contesting.com>
Sent: July 25, 2010 10:09 AM
Subject: Re: [WriteLog] WriteLog - MK II statup problem


> Joe,
>
> If the "Line LED" is flashing because the application, WriteLog, has
> selected the mic input instead of the line input how do I get straightened
> out so the Line is selected?  Same question for the second response.  If 
> the
> application has selected one of the other inputs on the sound card how do 
> I
> get it to change its mind?
>
> 73,
> Gary AL9A
>
>
> ----- Original Message ----- 
> From: "Joe Subich, W4TV" <lists at subich.com>
> To: <writelog at contesting.com>
> Sent: July 25, 2010 7:46 AM
> Subject: Re: [WriteLog] WriteLog - MK II statup problem
>
>> Flashing "Line LED" indicates that the application selected the mic
>> input instead of the line input.
>>
>> Vista/Windows 7 does not decide to make one of the inputs unavailable.
>> An application has selected one of the other inputs on the sound card.
>>
>>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/