[WriteLog] CW keying

[Hal Kennedy]

For op systems after Windows 98, Writelog needs a third party driver to
open LPT1.  Direct I/O is the one most of us use, but it costs about
$30.  There is also a free one out there somewhere on the internet...

For other reasons, I eventually switched to keying with COM 1 - which
can be used to control a rig and produce CW at the same time, and also
only requires a single transistor level shifter....

73
Hal
N4GG
---------------------------------

-----Original Message-----
From: writelog-bounces at contesting.com
[mailto:writelog-bounces at contesting.com] On Behalf Of Phillips, Richard
Sent: Wednesday, June 16, 2010 10:09 AM
To: writelog at contesting.com
Subject: [WriteLog] CW keying

I have used a parallel port for CW keying with Log-EQF using a home brew
cable with built in transistor switch.  

How can I use the same set-up with Writelog?

The parallel port button in the Ports menu for CW is grayed out.

73, Rich AA9L

 

 
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/