[WriteLog] CW Decoder setup: K3, WL and MicroKeyer2?

[Joe Subich, W4TV]

Eric,

There is nothing that you can reconfigure in either microKEYER or
microHAM Router.  You need to make microHAM CODEC the "default"
audio recording device in the Windows Audio Control Panel.

That configuration is *not supported* by microHAM.

73,

   ... Joe Subich, W4TV
       microHAM America
       http://www.microHAM-USA.com
       http://groups.yahoo.com/group/microHAM

       support e-mail: support at microham.com


On 11/29/2010 10:36 PM, Eric Rosenberg wrote:
> Joe --
>
> Thanks for the explanation.
> Here's the existing setup:
>
> The MicroHAM USB Device Router 7.7.1's AUDIO MIXER is now set this way:
>      MicroHAM CODEC (options are None and Intel(r) Integrated Audio (the
> computer's built-in soundcard)
>      Stereo box in NOT checked
>
> WriteLog v10.82a
>   SETUP|CW Decoder:  Mono (1 Radio) is checked
>
> I'm not sure how and what I re-configure.
>
> 73,
> Eric W3DQ
> Washington, DC
>
>
>
>
> [WriteLog] CW Decoder setup: K3, WL and MicroKeyer2? *Joe Subich, W4TV* lists
> at subich.com
> <writelog%40contesting.com?Subject=%5BWriteLog%5D%20CW%20Decoder%20setup%3A%20K3%2C%20WL%20and%20MicroKeyer2%3F&In-Reply-To=4CF45726.50907%40gmail.com>
> *Mon Nov 29 18:45:21 PST 2010*
>
>     - Previous message: [WriteLog] CW Decoder setup: K3, WL and MicroKeyer2?
>     <http://lists.contesting.com/pipermail/writelog/2010-November/032013.html>
>     - *Messages sorted by:* [ date
> ]<http://lists.contesting.com/pipermail/writelog/2010-November/date.html#32014>
> [
>     thread ]<http://lists.contesting.com/pipermail/writelog/2010-November/thread.html#32014>
> [
>     subject ]<http://lists.contesting.com/pipermail/writelog/2010-November/subject.html#32014>
> [
>     author ]<http://lists.contesting.com/pipermail/writelog/2010-November/author.html#32014>
>
> ------------------------------
>
>> * Stereo does work, as audio is being fed by the radio to the "other"
> *>* channel (which you can see), which you cannot hide (both displays
> *>  go away).
>> *
> *>* My conclusion is that the R + L connections on the plug that goes
> *>* into the radio from the MK2 DB-37 need to be swapped. My shaking
> *>* hands and semi-mediocre eyesight make me a bit more nervous about
> *>* this than I'd prefer!
> *
> No, the problem is in WriteLog.  If you are using the default sound
>
> card, the Stereo/Mono switching operates correctly.  If microHAM
> CODEC is not the default sound card (the preferred configuration for
> other modes) selecting "mono" will cause WriteLog to select the
> wrong (default) soundcard no matter which soundcard has been selected
>
> for "rec to PC" in the WriteLog Mixer Control.
>
> I forwarded your original posting to Wayne along with some test data.
> Wayne postulated the error and I was able to verify it on one of my
> test systems by feeding audio to a second (default) sound card in
>
> parallel with microHAM CODEC.
>
> While I have no specific knowledge of future releases, I am confident
> that Wayne will fix the bug in the next version of Writelog.
>
> 73,
>
>      ... Joe Subich, W4TV
>          microHAM America, LLC.
>
>          http://www.microHAM-USA.com<http://www.microham-usa.com/>
>          http://groups.yahoo.com/group/microHAM
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>