[WriteLog] Multi mode operation

[Joe Subich, W4TV]

 > Item 3 is what is new.   Plus I now  notice that WL can not find the
 > CAT por [5 in my case].  I checked all  cabling and wiring multiple
 > times.

That would also cause problems with microKEYER and audio switching.

Make sure you do not have the FT-1000MP in "M-Tune" mode.  Neither
Router nor WriteLog can follow a Yaesu rig when it is in "M-Tune"
(including QMB, etc.).  The display transceiver display must show
"VFO."

73,

    ... Joe, W4TV


On 9/3/2010 5:39 PM, W7OM at aol.com wrote:
>
> Joe W4TV has been a great  to me on a couple  of problems and I appreciate
> his time, patience and knowledge.
>
> I wrote about the fact I could not swap between modes, specifically  from
> cw or rtty to ssb.  This note is to add some info  for background.
>
> Setup:  FT-1000MP, microKeyer, and WriteLog.   OS  XP  Heil headset
>
> 1.  Setup ran smoothly until about a weeks ago when I  wanted to do a multi
> mode contest..
>
> 2.  Can not transmit on ssb after cw or rtty.
>
> 3.  When I first turn the computer and rig on; call up  a WL ssb program;
> all works fine until I switch to cw or  rtty.   Yet when I plug the mike
> direct into the FT-1000MP  ssb works fine.
>
> Item 3 is what is new.   Plus I now  notice that WL can not find the CAT
> por [5 in my case].  I checked all  cabling and wiring multiple times.
>
> I have not updated WL yet to the new versions until I get this  situation
> cleared up.  Monday I plan to re-install the microHam software  and see if
> that fixes the problem.
>
> Have I missed something?  Direct response appreciated.
>
> Have a great weekend.
>
> 73
>
> Rod
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>