[WriteLog] writelog/mmty/rigblaster problem

[rob beaudoin]

Hi All

Well in my continuing quest to resolve my Writelog/mmyt/rigblaster
combo I have discovered more infomation.

First let me say thank you thank you too:
Jim AD1C       John W5IFP    Walt w6sa      Jim   n7us   Don AA5AU
Irwin KD3TB     Steve    n4dxs     Ed  W0YK   Dick W0RAA

As you can see many offered sugestions..   W5IFP was thinking along the
lines I was about comport 4 already being used for something.

Unfortunately  I have not solved issue.   Let me give some info again and
something I just recently noticed.......Believe me I have probably
12 hours or so over a few days invested in this.   

MMTY by itself work FB.......Writelog great in cw/ssb.  RTTY with
writelog NO.   I have used writelog with mmty for many years and really
like it.   Recently I got a good used  3 year old computer and tried to get
Write/MMTY going ....No luck  All new version of Writelog
being use.  I have a ft1000mp    and  Rigblaster Plus.
using FSK.   This has worked well for me till now.  

Info   If you start MMTY  by itself  my digital  light on rigblaster is off  TILL you press
TX. Upon returning to recieve  digital light goes out.....Fine 
Eveen after a reboot      If I  I load  writelog with any  contest module  Rigblaster light comes on.
It stays on.......I have not even told it to bring RTTY screen yet.
No amount of changes to MMTY inside of writelog do anything.
RTTY screen will load MMTY and it is fine for RX   It does not matter
what port I tell rtty screen I use   it always say port not available. If I press
TX on MMTY screen   I get carrier   no didle.  Pressing RX does turn it off.
So something is happening.
In main writelog screen I have port 1 set for frequency control of readout.
This works ok.
  I took the time to setup spare computer  with older versions of writelog
and mmty.    Exact same results.????      I am thinking Writelog
has taken control of the comports and will not let MMTY do its
thing.   Some may think Rigblaster is the problem, if so why would it
work fine with MMTY alone ?   I have operated RTTY for a number of 
years and feel funny I cant figure this  out.   I had a simmilar problem   
1 1/2 years ago.......At that time I believe it was Dick W0RAA  who
got me going in right diredtion.   Believe me if I ever get this going
again I will write down  EVERYTHING  !!
Thanks in advance to any that may have sugestion......Your time really is
appreciated.
73 BoB WA1FCN