[WriteLog] TO7A

[DickT-W0RAA]

I'm using the latest Country files.  A few suggested I add /FM after TO7A 
and that would show Martinique.  I tried that and it worked.  Thanks to all 
for that suggestion.

As for the 90 degrees on the KH6, I'm still mystified why only that 
particular KH6 showed up as being at 90 degrees (East) from Colorado.  I 
worked him off the back of the beam and got him, but still wondering about 
the false reading.  I have everything setup properly I'm sure, as all the 
other bearing headings are fine.

No need for further responses.  Thanks for the help guys.

73,

Dick
W0RAA


----- Original Message ----- 
From: "WS7I" <ws7ik7tj at gmail.com>
To: "DickT-W0RAA" <dickt at w0raa.com>
Sent: Sunday, March 06, 2011 7:52 AM
Subject: Re: [WriteLog] TO7A


Update your country files and put him in Martinique if he isn't.

Not hard to work KH6 off the back of most yagi's.  270 - 180 = 90

On Sat, Mar 5, 2011 at 7:49 PM, DickT-W0RAA <dickt at w0raa.com> wrote:
> I worked TO7A in the ARRL DX SSB this weekend. I got "Unknown Multiplier".
> I looked him up on qrz.com and it's a legitimate call in Martinique. I
> entered MARTINIQUE in my log and all I get is a ? under the M (Multiplier)
> column. Can somebody perhaps explain what's goin g on?
>
> Dick
> W0RAA
>
> PS: Also, I worked a KH6 and the beam heading showed as 90 degrees
> (straight East). It should have been in the 270 degree range.
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>