[WriteLog] How get audio on both channels?

[Joe Subich, W4TV]

> Is there a way to tell WL to put all audio on both channels? In
> other words, how do I "un-tell" Writelog about L and R radios, still
> have two entry windows and let my monaural SO2R box do the transmit
> audio switching?

Radio | This Window is ... and uncheck the left or right designation.

73,

    ... Joe, W4TV


On 3/6/2011 2:14 PM, Rick Tavan N6XI wrote:
> The WL Help file contains the following:
>
> If you use the Radio menu with two entry windows and tell it you have a
> Radio Left and a Radio Right, then when you "Activate this Radio" (CTRL+R),
> the sound board mutes the appropriate output channel. You can have two
> radios with one sound board this way. *If you have not told WriteLog whether
> you are left or right, it puts all audio on both channels.* Note that this
> muting is in effect whether you are transmitting a WAV file or not, so your
> microphone signal is also routed to the correct rig.
> I would like to have the behavior described in the underlined sentence: all
> audio on both channels. I suppose I or someone "told" Writelog to switch
> channels when it switches rigs. Is there a way to tell WL to put all audio
> on both channels? In other words, how do I "un-tell" Writelog about L and R
> radios, still have two entry windows and let my monaural SO2R box do the
> transmit audio switching?
>
> /Rick
>