[WriteLog] No Rig! problem (TS-2000)

[Tom Shelton]

I made sure the settings were correct in the entry window.

A few other things I’ve tried:  

Changing the data rates – no joy.
Changing the line in the setup window – no joy.
Swapping the location with the working IC-7200 – no joy.
I’ve done several full reloads of writelog – no joy.

Getting frustrated . . .

Tom, AB3IC

From: Jim Rhodes 
Sent: Thursday, November 17, 2011 1:41 AM
To: Tom Shelton 
Cc: writelog at contesting.com 
Subject: Re: [WriteLog] No Rig! problem

You did set the frequency in that entry window to "rig on com 4" didn't you?

Jim K0XU Sent from my Xoom tablet

On Nov 16, 2011 6:52 PM, "Tom Shelton" <gl1800winger at verizon.net> wrote:

  I last wrote to you about a few problems I was having. A couple of them I figured out, but one is still a mystery to me.

  I have a Kenwood TS-2000 using port 4 (9600, N, 8, 1). I’m using a USB/Serial adapter here. In the entry window, the rig is showing as No Rig! instead of the frequency and mode. I also have an IC-7200 using port 5 (same as above). This rig shows up properly in the in the entry window.

  I’ve verified both configs in the writelog.ini file.

  Both radios work well with Ham Radio Deluxe.

  I’d like to use the TS-2000 for the Sweepstakes this weekend, so having the frequency is necessary for the log. Please help soon...

  Tom Shelton, AB3IC

  No electrons were harmed in the sending of this message, although several were terribly inconvenienced.
  Draco Dormiens Nunquam Titillandus
  _______________________________________________
  WriteLog mailing list
  WriteLog at contesting.com
  http://lists.contesting.com/mailman/listinfo/writelog
  WriteLog on the web:  http://www.writelog.com/