[WriteLog] Help? Writelog and IC-7000 CAT issues

[Joe Subich, W4TV]

What CI-V interface are you using?  Does it require power via DTR
or RTS?

If so, have you properly configured any necessary overrides on
COMn_RTS_INIT and COMn_DTR_INIT?

 > This didn't work so I tried just explicitly with the default setting
 > instead:
 >
 > Icom IC-7000=0x77.
 > (of course I changed the rig back to 77h too)

Why are you not using the buit-in IC-7000 setting with the default
70h address?

Do you have the 7000 set to a fixed baud rate and is WriteLog set
to use the same *fixed* baud rate?

73,

    ... Joe, W4TV



On 10/1/2011 4:21 AM, Jack wrote:
> Here we are up in Tuolumne County, CA on next to no Internet connection, Icom IC-7000 isn't talking to Writelog. This same rig talks to this same computer when I run Ham Radio Deluxe, so I know it isn't the CI-V cable. I have the latest update of Writelog.
>
> I have tried setting the rig CI-V address to something like 44h (it was on the default 77h setting) and then I added these lines to the RIGS section Writelog.ini:
>
> Icom IC-7000=0x44
>
> This didn't work so I tried just explicitly with the default setting instead:
>
> Icom IC-7000=0x77.
> (of course I changed the rig back to 77h too)
>
> No joy.
>
> Any suggestions?
>
> 73 and KB!
> Jack K6JEB @ K6YV
>
>
> Ken Keeler<kenkeeler at jazznut.com>  wrote:
>
> CQP Practice sept. 30
>
> N6O; N6RO OP, 1 hour
>
> 20: 15
> 40: 28
> 80: 14
>
> TOT: 57 X 16 = 2256
>
> cu tomorrow
>
> _____________________________________________
>
> NCCC mailing list (http://lists.contesting.com/mailman/listinfo/nccc)
> Post to: nccc at contesting.com
> Manage your subscription at: http://lists.contesting.com/mailman/options/nccc
> Archives at: http://lists.contesting.com/mailman/private/nccc/
>
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>