[WriteLog] Trouble with connecting to ports

[Eric - VE3GSI]

Larry,

Under Writelog's Setup|Ports make sure POLLING for the port selected is 
'checked', while there make sure Comm PTT = No as it is not needed.
Do make sure you select a fixed port speed ie.: 9600 and not auto in either 
the logging program or on the rig.

You should be good to go,
Eric - VE3GSI

----- Original Message ----- 
From: "Larry M. Leitch"
Sent: Friday, October 28, 2011 9:00 AM
Subject: [WriteLog] Trouble with connecting to ports


> Hi,
>
> I am using WriteLog 10.62H, and the microHam Digi-Keyer. The problem is
> that I can not connect WriteLog to any port.
>
> microHam Device Router 7.7.1 shows COM4 as active; the displayed
> frequency correctly shows the frequency on the Icom 756 Pro III.
>
> I start WriteLog and the button under "Radio" on the main page shows
> "1800 kHzLSB", I go to Setup...Ports and select Icom 756 Pro III under
> Rig Type for COM4, press OK, and the "Radio" button now displays "No 
> Rig!".
>
> The Device Router works fine with Dx4Win and MixW.
>
> There is probably something simple that I am overlooking.
>
> Thanks for any help.
>
> Larry Leitch