[WriteLog] Fw: TS-590S with Writelog

[Dave Earnest, K7JJ]

Thanks to all that provided input. I did get a fix by selecting:
 
Kenwood
9600 baud
 
I had originally left the setting at auto-select (did not work).
 
I did try the Elecraft settings with no joy.
 
All is well and ready for NA CW Sprint!
 
73,
 
Dave, K7JJ

Dave Earnest

----- Forwarded Message -----
From: JE Brown <W4LC at fuse.net>
To: Dave Earnest <k7jjdave at yahoo.com>
Sent: Monday, September 5, 2011 5:10 PM
Subject: Re: [WriteLog] TS-590S with Writelog

I am running 1087E, and get all functions with TS-2000 selected.  However, I have read that some have had success selecting Elecraft K2.  You might try that.

----- Original Message ----- From: "Dave Earnest" <k7jjdave at yahoo.com>
To: <writelog at contesting.com>
Sent: Monday, September 05, 2011 7:14 PM
Subject: [WriteLog] TS-590S with Writelog


I'm just integrating a new 590. It works fine with DX4WIN using the TS-870 rig selection.

However, in Writelog 10-87E, I get no rig/freq control using Kenwood or Kenwood TS-850. With TS-2000, I do get mode control.

I do get freq readout with MMTTY stand alone and am o.k. with freq/mode control with DX4WIN. I am running Win 7/64 bit.

Any suggestions would be welcomed.

73,

Dave, K7JJ


Dave Earnest
_______________________________________________
WriteLog mailing list
WriteLog at contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/