[WriteLog] Problem with 2 radios - Solved

[W2LE]

Clicking on the freq window displays the "Logging/Duping Freq for the 
current entry window" window.
At the bottom of that window there's a line to specify 'how should the 
entry window know on which band to dupe" - it was manual entry, changed 
that to "rig on COMM4" - and all is well now.

Paul  W2LE

On 4/3/2012 15:08, Joe Subich, W4TV wrote:
>
> Paul,
>
> See the configuration example for WriteLog (USB) and MK2R+ available
> in Router (Help | Download Documents) or on-line at
> www.microHAM-USA.com/support.html.
>
> If you're not displaying one of the frequencies on WriteLog, you
> probably have a ports configuration issue in WriteLog ... IIRC it
> should be possible to use the same Router configuration for both
> WriteLog and Win-Test *if* you configure Writelog so it doesn't set
> RTS and DTR on the CAT ports (see [RIGS] in WriteLog.ini).
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 4/3/2012 12:02 PM, W2LE wrote:
>> Setting up a new  MK2R+ with Writelog 11.02B.  Using an IC7800 and a K3.
>>
>> I have the two radio windows open and focus shifts when I click on those
>> windows.  But the freq displays for only one radio, the other band can
>> be set if I left click on the freq window.
>>
>> If I only define one of the radios at a time in the ports table it
>> displays its freq ok - the K3 and 7800 work if in the ports table by 
>> itself.
>>
>> In Win-Test there is no problem - leads me to think Router is set up
>> ok.  What am I missing in WL?
>>
>> Paul  W2LE
>> _______________________________________________
>> WriteLog mailing list
>> WriteLog at contesting.com
>> http://lists.contesting.com/mailman/listinfo/writelog
>> WriteLog on the web:  http://www.writelog.com/
>>
>