[WriteLog] QSL Status Missing in ADI Files Exported from WL (Gary AL9A)

[Brian Miller]

Thanks Gary

The fields that I am looking for are the ADIF QSL_RCVD and QSL_SENT fields. 
It appears that these fields are not exported by the WL general DX logging 
module.

73, Brian VK3MI ZL1AZE

----------------------------------------------------------------------

Message: 1
Date: Sun, 26 Aug 2012 09:03:53 -0800
From: "Gary AL9A" <al9a at mtaonline.net>
Subject: Re: [WriteLog] QSL Status Missing in ADI Files Exported from
WL
To: <WriteLog at contesting.com>
Message-ID: <F61B364CDD0C4BF9869E7A0DF0D79E0F at AL9APC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original

Brian,

I think it is dependent upon which contest module you are using.  In looking
back through some of my recent contest adi files I see that some of them
have the RST_SENT and RST_RCVD fields included while other contests do not.
Even though most contests require RST as part of the exchange many of them
do not.  In my case when I load my contest adi file into my general logger,
DXBase 2007, the import routine sets the RSTS and RSTR values to the default
of 599.  I don't think the lack of these values in the adi file is
indicative of a problem in WriteLog.

73,
Gary AL9A


----- Original Message ----- 
From: "Brian Miller" <brianmiller at xtra.co.nz>
To: <WriteLog at contesting.com>
Sent: August 25, 2012 6:59 PM
Subject: [WriteLog] QSL Status Missing in ADI Files Exported from WL


>I note that exporting a WL log to ADIF format results in an ADIF file which
> does not seem to include the QSL status field (e.g., sent and received
> info)
> that is held within the WL database.
>
> Have others noticed this and/or found a work around?
>
> 73
>
> Brian VK3MI ZL1AZE
>