[WriteLog] Standalone software for Writelog
mike_heideman at hotmail.com
Fri Dec 7 17:17:16 EST 2012
For M/2 you should be able to assign one station as Run and the other station as Mult even though they are really peers. You then get a separate timer for each station. Right-click on the Band Changes window to select the bandchanges per hour option. Hopefully it is set for the correct number of band changes per hour for the particular contest.
If you have more than one interlocked radio/computer for each role then choose the role that is appropriate for each radio.
We used the bandchange timers in CQWW CW. We noticed that the 10-minute timers turned red again occasionally when there was a large time gap between QSOs on the same band. Usually the remaining time that appeared was less than a minute. I seem to recall from earlier experiences that if the clocks aren't sync'ed between all the computers then the timers have this behavior. This should not be a problem if it's set for band changes per hour.
> Date: Fri, 7 Dec 2012 02:40:47 +0100
> From: "Stein-Roar Brobakken[LA6FJA]" <sroabr at gmail.com>
> To: <WriteLog at contesting.com>
> Subject: [WriteLog] Standalone software for Writelog
> Is there anyone out there capable making a standalone software for Tracking
> bandchanges per hour for Multi Two Class stations for use with Writelog?
> Writelog don't support Multi-TWO this only M/S
> 73s LA6FJA Rag
More information about the WriteLog