[WriteLog] [RTTY] CAT control on a Kenwood TS-870

[Nikola Nikolov]

Hi,

the cable I use for many years with my TS870S is a straight through cable, 
i.e. pin 1 of
the serial port goes to pin 1 of the radio, pin 2 to pin 2 and so on.

Best 73's !
De Nick - LZ1ZM






----- Original Message ----- 
From: "Vince" <rradiohham232 at sbcglobal.net>
Cc: "Writelog Reflector" <writelog at contesting.com>
Sent: Wednesday, February 15, 2012 9:03 PM
Subject: [RTTY] CAT control on a Kenwood TS-870


>I sent this out yesterday with no text, and had several interesting
> reply's, but not the one I was looking for, so I will try again, maybe I
> will get it right this time.
>
> What is the proper cable to use with CAT control on a Kenwood TS-870 ? I
> tried a serial cable and it is not working, using Writelog, I have the
> port and baud rate set OK. I am using a USB to Serial converter, could
> this be part of the problem? this setup worked before with a Kenwood
> TS-450.
>
> I have used CAT control with my Icom radios with no problems, I am
> trying to help a friend with his Kenwood.
>
> TIA
> Vince, K6BIR
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty