[WriteLog] W/L & MMTTY

[Joe Subich, W4TV]

Connect the hardware PTT (VOX) from SignaLink to the PKS pin (pin 9)
of the ACC2 connector and disable COMM PTT (software command PTT) in
RTTY.

The TS-2000 (and other recent Kenwood transceivers) requires PTT on
the PKS pin to enable audio from the ACC2 jack (and mute the mic)
for AFSK operation.  The software PTT commands emulate PTT on the
mic jack and enable the microphone.

It's also possible that Windows 7 has the audio output level turned
down for WL/MMTTY but the first thing to check is proper PTT to
select the ACC2 input.

73,

    ... Joe, W4TV


On 1/13/2012 6:09 PM, Tom Shelton wrote:
> I have MMTTY working fine by itself, but when I try to run it from inside Writelog, the following happens.
>
> I receive the signal, I can save the calls, when I try to transmit, my rig keys, but no modulation.
>
> Kenwood TS-2000
> SignaLink – W/L is selecting the correct soundcard
> W/L Version 11.01
> Windows 7
>
> what am I missing?
>
>
> Tom Shelton
>
> No electrons were harmed in the sending of this message, although several were terribly inconvenienced.
> Draco Dormiens Nunquam Titillandus
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/