[WriteLog] IC7000 Cat Port

[Mohamed Kharbouche]

Hi Karl,

I don't think that the problem comes from the " 2 stop bits". I just tried
my Ic-7000 with WL and it works just fine with 2 stop bits . I Tried " 1
stop"  bit with another program (Logger32) and everything is ok.

The Hex address must be the default one (70). You must check it in the
IC-7000.

Check also the baud speed in WL. It must be the same on the Radio, don't
use the "Auto" on the port setting. My setting is 19200.

I hope that this will help.

Best 73's, Mohamed, CN8KD.

On Wed, Mar 7, 2012 at 8:59 PM, Karl Kaukis <karl at kaukis.com> wrote:

> Trying to configure CAT for IC7000 and WL.  CAT works fine with most other
> programs.  WL does not see the 7000.  WL opens cat port as 2 stop bits
> instead of 1 as is correct and as other programs do.  Is that the problem?
>  What do I do?
>
> --
> Karl Kaukis
> 6714 E. 19th Ave.
> Stillwater, OK USA 74074
> Phone:  405-334-1511
> FAX:  877-334-1511
> Skype:  karl.kaukis
> karl at kaukis.com
> _______________________________________________
> WriteLog mailing list
> WriteLog at contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
>